This is an old revision of the document!
I use my Raspberry pi as an owncloud client to synchronize my NAS and my server. Unfortunately, the official package is not up-to-date so I have to build it by myself.
Update!: this page has been updated for client 2.2.4.
DISCLAIMER Tested on raspbian jessie on raspi 1 only. Feedback welcome on twitter. See this thread for some known issues on other versions.
Note: if you need a newer version of the client, just tweet me @sgripon.
If you don't want to compile by yourself, you can get the debian package installer from http://pub.sgripon.net/owncloud-client/rpi/. To install:
sudo dpkg -i owncloud-client-2.2.4_armhf.deb
If there are missing dependencies, this command should automatically install all:
sudo apt-get install -f
If not, you should be able to install manually missing packages with apt-get.
I also experiment ppa. You can try it by adding my ppa to the source.list. Add line:
deb http://pub.sgripon.net ppa/
sudo apt-get update sudo apt-get install owncloud-client
I use raspberry pi emulator to build owncloud. See Raspberry pi emulator. This is to avoid too much writing on SD card and breaking it too quickly.
Most of the build instructions are from owncloud official website (http://doc.owncloud.org/desktop/2.2/building.html) with some adjustments for RPI.
Get owncloud client sources from official web site here: https://download.owncloud.com/desktop/stable/owncloudclient-2.2.4.tar.xz.
This tutorial assumes that the work is done on raspbian in folder /home/pi/dev/owncloud-client. If not, change all paths.
On your pi:
Some dependencies are necessary to build the two packages.
sudo apt-get install libssl-dev sudo apt-get install libsqlite3-dev sudo apt-get install libqt4-dev libqtkeychain0 qtkeychain-dev libqt4-sql-sqlite
You will need to install cmake if not already done to build both:
sudo apt-get install cmake
The following script downloads and builds the source code (remove download command (wget) if already done). The script must be invoked with the desired client version:
The script should work for future versions unless ownlcoud changes files naming.
#!/bin/sh # Download and extract source from official website if [ ! -f owncloudclient-$1.tar.xz ]; then wget https://download.owncloud.com/desktop/stable/owncloudclient-$1.tar.xz fi tar -xf owncloudclient-$1.tar.xz # Build mkdir client-build cd client-build cmake -DWITH_DOC=TRUE -DCMAKE_BUILD_TYPE="Release" ../owncloudclient-$1 make # Prepare a redistribuable package make package
Then, installation. The following script must be run as root:
make install # It seems that libocsync and libowncloudsync shared libraries must be installed manually: cp csync/src/libocsync.so.2.2.4 /usr/local/lib cp src/libsync/libowncloudsync.so.2.2.4 /usr/local/lib ldconfig
In /home/pi/dev/owncloud-client, create a deb folder:
cd /home/pi/dev/owncloud-client mkdir -p deb/owncloud-client
First thing is to copy all needed files to this new folder. We are lucky, the “make install” command has produced a file with all files installed, so it can be used with rsync:
cd deb/owncloud-client rsync --files-from /home/pi/dev/owncloud-client/client-build/install_manifest.txt / .
Add also libraries installed manually:
cp /usr/local/lib/libocsync.so.2.2.4 usr/local/lib cp /usr/local/lib/libowncloudsync.so.2.2.4 usr/local/lib
Then, follow tutorial How To Build a Debian Package.
The full script to build the debian package:
#!/bin/sh DIR=`pwd` mkdir -p deb/owncloud-client cd deb/owncloud-client rsync --files-from $DIR/client-build/install_manifest.txt / . cp /usr/local/lib/libocsync.so.$1 usr/local/lib cp /usr/local/lib/libowncloudsync.so.$1 usr/local/lib mkdir DEBIAN cat <<EOT>> DEBIAN/control Package: owncloud-client Version: $1+debian+rpi1 Homepage: https://wiki.sgripon.net/doku.php?id=building_owncloud_client_for_raspberry_pi Depends: libc6 (>= 2.13-28), libgcc1 (>= 1:4.4.0), libqt4-network (>= 4:4.7.0~beta1), libqt4-test (>= 4:4.5.3), libqt4-xml (>= 4:4.5.3), libqtcore4 (>= 4:4.8.0), libqtgui4 (>= 4:4.7.0~beta1), libqtkeychain0 (>= 0.1.0), libstdc++6 (>= 4.4.0), libqtwebkit4, libqt4-xmlpatterns Priority: optional Section: net Architecture: armhf Essential: no Installed-Size: 1024 Maintainer: Sebastien Gripon <firstname.lastname@example.org> Description: GUI app to sync a folder to ownCloud Specify one ore more directories on the local machine to sync your ownCloud server, and always have your latest files wherever you are. Make a change to the files on one computer, it will flow across the others using these desktop sync clients. EOT cat <<EOT>> DEBIAN/postinst #!/bin/sh set -e echo "Postinst running ..." ldconfig echo "Done" EOT chmod 0755 DEBIAN/postinst # Build package cd $DIR/deb dpkg-deb --build owncloud-client # Rename package mv owncloud-client.deb owncloud-client-$1_armhf.deb
Must be invoked as sudo with version number as argument:
sudo ./oc-build-deb.sh 2.2.4
If you want to launch owncloud client automatically at startup, just add this line:
at the end of /etc/xdg/lxsession/LXDE/autostart
Note that owncloud client needs a graphical session to be launched so if you want to launch the client at raspi boot, it must be configured to start X automatically.
Older versions can have a different build sequence:
Share this page: