User Tools

Site Tools


add_chacon_di.o_remote_control_support_in_domoticz

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
add_chacon_di.o_remote_control_support_in_domoticz [2017/01/02 19:26]
sgripon [Domoticz]
add_chacon_di.o_remote_control_support_in_domoticz [2017/01/02 19:35]
sgripon [Add Chacon DI.O remote control support in Domoticz]
Line 1: Line 1:
 ====== Add Chacon DI.O remote control support in Domoticz ====== ====== Add Chacon DI.O remote control support in Domoticz ======
- 
-** :!: TUTORIAL UNDER CONSTRUCTION :!: ** 
  
 ~~socialite~~ ~~socialite~~
Line 108: Line 106:
 ===== Domoticz ===== ===== Domoticz =====
  
-In domoticz, add a device ​"​MySensors USB Gateway"​. Check that serial port is properly configured. Default one should be good in raspberry pi. Then, plug the arduino on the raspberry pi with USB. You should see the detected MySensors gateway on domoticz logs:+In domoticz, add a hardware ​"​MySensors USB Gateway"​. Check that serial port is properly configured. Default one should be good in raspberry pi. Then, plug the arduino on the raspberry pi with USB. You should see the detected MySensors gateway on domoticz logs:
  
   2017-01-02 19:​21:​02.562 ​ MySensors: Using serial port: /​dev/​ttyACM0   2017-01-02 19:​21:​02.562 ​ MySensors: Using serial port: /​dev/​ttyACM0
Line 118: Line 116:
   2017-01-02 19:​21:​08.695 ​ Incoming connection from: 192.168.0.43   2017-01-02 19:​21:​08.695 ​ Incoming connection from: 192.168.0.43
  
-And switches are properly ​detcted. You should be able to add them in the following ​domoticz view:+And switches are properly ​detected. You should be able to add them in the devices ​domoticz view:
  
 {{ ::​domoticz-di.o.png |}} {{ ::​domoticz-di.o.png |}}
add_chacon_di.o_remote_control_support_in_domoticz.txt ยท Last modified: 2017/01/02 19:35 by sgripon